Construction
Solid annealed bare copper conductor polythelene insulated shielded with polyester backed aluminium tape and additional shielded with fine tinned braid protected with polyester tape wrapping and sheathed with P.V.C.

Conductor	0.7/0.9/1.0/1.15/1.6mm/0.81
Dielectric	Solid Polythelene / Foam Polythelene
Cable Configuration	RG-59, RG-6, RG-8, RG-9, RG-11, LCG-21

Important Parameters

	Dielectric
	Solid PE	Foam PE
Impendance	75 ± 3ohms	75 ± 3ohms
Capacitance	67 pf/meter	53pf/meter
Velocity of propagation	66%	80%
Attenuation (at (100 MHz.)	8-4 db/100yds	6-3.5 db/100yds

Salient Features for Co- Axial Cables
Polyester backed aluminium tape shielding is done with 100% coverage and additional layer of shielding is provided with fine tinned copper braid. This ensures high quality in the reception and transmission of signals.

Manufacturing is done on automatic modern machines and under precisely controlled conditions such that in usage losses are kept at lowest possible.

For lower values of capacitance and attenuation losses and higher velocity of propagation cables with foam PE dielectric are preferred over solid PE dielectric.